| 2012 | 2-D forward optical scanner with glass microlens and isolation blocks using thermal reflow | 지창현 | Conference Paper |
| 2013 | A low frequency vibration energy harvester using magnetoelectric laminate composite | 이승준; 이향운; 지창현 | Article |
| 2011 | A MEMS-enabled 3D zinc-air microbattery with improved discharge characteristics based on a multilayer metallic substructure | 지창현 | Article |
| 2012 | A particle counting system using the photodetector array of a CMOS image sensor | 지창현 | Article |
| 2012 | A refreshable braille cell based on pneumatic microbubble actuators | 지창현 | Article |
| 2011 | A solid hydraulically amplified piezoelectric microvalve | 지창현 | Article |
| 2015 | Biaxial vector-graphic scanning micromirror using radial magnetic field | 지창현 | Conference Paper |
| 2020 | Design optimization of a 6.4 mm-diameter electromagnetic 2D scanning micromirror | 지창현 | Article |
| 2018 | Disposable MEMS optrode array integrated with single LED for neurostimulation | 전상범; 지창현 | Article |
| 2022 | Electromagnetic 2D scanning micromirror fabricated with 3D printed polymer parts for LiDAR applications | 지창현 | Article |
| 2018 | Electromagnetic 2D Scanning Micromirror for High Definition Laser Projection Displays | 지창현 | Article |
| 2015 | Electromagnetic biaxial microscanner with mechanical amplification at resonance | 지창현 | Article |
| 2016 | Electromagnetic biaxial vector scanner using radial magnetic field | 지창현 | Article |
| 2017 | Electromagnetic linear vibration energy harvester using sliding permanent magnet array and ferrofluid as a lubricant | 지창현 | Article |
| 2022 | Electromagnetic omnidirectional scanning micromirror with multi jet fusion printed structures for smart factory applications | 지창현 | Article |
| 2015 | Electromagnetically actuated 2-axis scanning micromirror with large aperture and tilting angle for lidar applications | 지창현 | Conference Paper |
| 2017 | Electromagnetically actuated biaxial scanning micromirror fabricated with silicon on glass wafer | 지창현 | Article |
| 2012 | Fabrication of a vertical sidewall using double-sided anisotropic etching of 〈100〉 oriented silicon | 지창현 | Article |
| 2011 | Fabrication of polydimethylsiloxane microlens arrays by surface tension induced liquid separation | 지창현 | Article |
| 2018 | High-reflectivity electromagnetic two-axis microscanner using dielectric multi-layer reflective surface | 지창현 | Article |
| 2018 | Impact-based piezoelectric energy harvester as a power source for a neural activity monitoring circuit | 지창현 | Article |
| 2018 | Impact-based piezoelectric vibration energy harvester | 지창현 | Article |
| 2021 | Implantable optrode array for optogenetic modulation and electrical neural recording | 전상범; 지창현 | Article |
| 2011 | Improvement of sense mode bandwidth of vibratory silicon-on-glass gyroscope using dual-mass system | 지창현 | Article |
| 2015 | Indirect impact based piezoelectric energy harvester for low frequency vibration | 지창현 | Conference Paper |
| 2021 | Low Power Electromagnetic Scanning Micromirror for LiDAR System | 지창현 | Article |
| 2015 | Low-frequency vibration energy harvester using a spherical permanent magnet with controlled mass distribution | 전상범; 지창현 | Article |
| 2015 | Macro fiber composite-based low frequency vibration energy harvester | 지창현 | Article |
| 2019 | MEMS vibrational energy harvesters | 지창현 | Review |
| 2013 | Microfabricated environmental barrier using ZnO nanowire on metal mesh | 지창현 | Article |
