View : 41 Download: 0
Insulation performance evaluation of stone-finished exterior insulation systems with insulation frames for green remodeling of concrete exterior walls
- Title
- Insulation performance evaluation of stone-finished exterior insulation systems with insulation frames for green remodeling of concrete exterior walls
- Authors
- Choi; Bo-Hye; Song; Seung-Yeong
- Ewha Authors
- 송승영
- SCOPUS Author ID
- 송승영
![scopus](/images/layout/icon2.png)
- Issue Date
- 2024
- Journal Title
- Journal of Building Engineering
- ISSN
- 2352-7102
- Citation
- Journal of Building Engineering vol. 90
- Keywords
- Exterior insulation; Green remodeling; Insulation frame; Stone finish; Thermal bridge; Thermal insulation
- Indexed
- SCIE; SCOPUS
![scopus](/images/layout/scopus2.gif)
- Document Type
- Article
- Abstract
- This study aimed to evaluate the thermal bridge reduction effect of insulation frames applied to a stone-finished exterior insulation system, which is commonly used in green remodeling projects. The insulation performance of the exterior walls and the energy performance of the building in a baseline case in which an existing steel pipe frame was applied were compared with those in cases alt 1 and alt 2, which included application of double- and single-wired truss-shaped insulation frames, respectively. First, a three-dimensional steady-state heat transfer simulation was conducted for the exterior wall-floor joint of the model building, and the effective U-factor was obtained. Next, mock-ups were constructed and the U-factor was tested to verify the insulation performance of cases alt 1 and alt 2. The heat loss decreased as the effective U-factors of alt 1 and alt 2 decreased by 19.0 % and 19.7 %, respectively, compared to the baseline case, according to the heat transfer simulations. In the mock-up test, the U-factors of alt 1 and alt 2 were similar to design U-factor, indicating almost no heat loss caused by the thermal bridges. Notably, the U-factor of alt 2 was 2.4 % lower than that of alt 1. Finally the energy performance of the entire building was compared through dynamic building energy simulations by reflecting the thermal bridging effect. The annual heating and cooling energy use of alt 1 and alt 2 were 2.5 % and 2.6 % lower than those of the baseline case, respectively, confirming the energy-saving effect of reducing thermal bridges. © 2024 Elsevier Ltd
- DOI
- 10.1016/j.jobe.2024.109412
- Appears in Collections:
- 공과대학 > 건축도시시스템공학과 > Journal papers
- Files in This Item:
There are no files associated with this item.
- Export
- RIS (EndNote)
- XLS (Excel)
- XML