View : 450 Download: 0

Migration of monomers, plastic additives, and non-intentionally added substances from food utensils made of melamine–formaldehyde resin following ultraviolet sterilization

Title
Migration of monomers, plastic additives, and non-intentionally added substances from food utensils made of melamine–formaldehyde resin following ultraviolet sterilization
Authors
Kim H.S.Lee Y.J.Koo Y.J.Pack E.C.Lim K.M.Choi D.W.
Ewha Authors
임경민
SCOPUS Author ID
임경민scopus
Issue Date
2021
Journal Title
Food Control
ISSN
0956-7135JCR Link
Citation
Food Control vol. 125
Keywords
Melamine–formaldehyde resinMigrationMonomerNon-intentionally added substancesPlastic additivesSafety assessmentUltraviolet exposure
Publisher
Elsevier Ltd
Indexed
SCIE; SCOPUS WOS scopus
Document Type
Article
Abstract
Ultraviolet (UV) sterilization of kitchenware is considered environmentally friendly and economical. However, there are many cases of extended UV irradiation, which raises concerns about the release of hazardous substances. Here, we investigated the migration of monomers, plastic additives, and non-intentionally added substances (NIAS) from food utensils made of melamine–formaldehyde resin into food simulants after UV irradiation for up to 7 d. The migration of monomers (melamine and formaldehyde) was analyzed using a high-performance liquid chromatograph with a diode array detector. When irradiated with a UV lamp for 7 d, the release of melamine from food utensils made of melamine–formaldehyde resins increased by up to 85-fold compared with that from the unexposed samples. Formaldehyde release increased up to 4-fold after UV exposure. UV exposure led to a sustained increase in melamine migration in a time-dependent manner. Formaldehyde release also increased on the first day, but plateaued after seven days of exposure. Safety assessment demonstrated that there is a low risk of melamine and formaldehyde exposure of up to 11.78% and 7.95%, respectively, compared with the tolerable daily intake. Non-target screening analysis of plastic additives and NIAS from melamine–formaldehyde resin and other synthetic resins was performed using high-performance liquid chromatography quadrupole time-of-flight mass spectrometry. Exposure of melamine–formaldehyde resin to UV for 7 d drastically increased the release of plastic additives and NIAS. In contrast, for other synthetic resins (polypropylene, polyamide, polyethylene, polyethylene terephthalate, and silicone), the peaks of these compounds disappeared or decreased after UV exposure, indicating that the melamine–formaldehyde resin is less resistant to UV degradation than other synthetic resins. © 2021 Elsevier Ltd
DOI
10.1016/j.foodcont.2021.107981
Appears in Collections:
약학대학 > 약학과 > Journal papers
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

BROWSE