View : 785 Download: 0

광중합 전 교정용 접착레진의 온도변화에 따른 브라켓의 전단결합강도

Title
광중합 전 교정용 접착레진의 온도변화에 따른 브라켓의 전단결합강도
Other Titles
Shear bond strength at bracket according to different pre-heating adhesive resin temperature
Authors
서지혜
Issue Date
2008
Department/Major
임상치의학대학원 임상치의학과임상교정치의학전공
Publisher
이화여자대학교 임상치의학대학원
Degree
Master
Abstract
Pre-heated adhesive resin prior to light curing increases monomer conversion and reduces the duration of light exposure. The purpose of this study was to compare the shear bond strength and ARI score at lower anterior metal bracket under three different curing temperature of orthodontic adhesive resin(22℃, 54℃, 60℃). A new commercial device(Calset_(TM), AdDent, INC., Danbury, CT, USA) could preheat adhesive resin to 54℃ or 60℃ prior to light curing. Sixty human incisors were divided into 3 groups. After same etching and primer procedure, metal brackets were directly bonded in group 1 with 22℃(Room temperature) Transbond_(TM) XT. In group 2, brackets were bonded with 54℃ resin and brackets in group 3 were bonded with 60℃ resin. All brackets were light cured for 20 seconds. All samples were stored at 37℃ distilled water for 24 hours. After 24 hours, shear bond strength(SBS) was tested using an Mini Universal Testing Machine. Mean of SBS between group 1, 2, and 3 were not statistically significantly different (11.01 MPa, 11.78 MPa, and 12.61 MPa, respectively; P>0.05). The Adhesive Remnant Index was also not significantly different. Most bond failure of all groups occurred between adhesive resin-bracket base.;이 연구는 같은 조성의 레진 중합체라도 중합 시 온도에 따라 중합률이 다르며 이에 따른 레진의 물리, 화학적 성질이 달라진다는 기존 연구 결과들을 참고하여, 교정용 접착레진의 중합 전 온도 상승이 브라켓의 전단결합강도를 증가시킬 수 있는 지 관찰함으로써 장치 탈락율을 감소시킬 수 있는 새로운 접착방법을 제안해 보는 것이 목적이었다. 임상적으로 많이 사용하는 다이메트아크릴레이트계(dimethacrylate) 광중합 접착 레진인 TransbondTM XT 접착 레진을 실온(1군)과 열 조절 장치 CalsetTM 을 이용하여 접착레진의 온도를 54℃(2군), 60℃(3군)로 달리하여 이에 따른 브라켓의 전단결합강도와 탈락양상을 알아보았다. 순측 법랑질이 손상되지 않고 파절이나 충치가 없이 발거된 상, 하악 전치 60개를 교정용 자가 중합형 레진으로 시편 제작 후 3개의 그룹으로 나누어 통상적인 방법으로 산부식, 프라이머 도포 후 정해진 접착레진의 온도로 하악 전치 메탈 브라켓을 부착 후 24시간 동안 37℃ 증류수에 담근 후 미니만능물성시험기를 이용하여 각 군의 전단결합강도를 측정하였으며, 접착제 잔류 지수(ARI; Adehesive Remnant Index)를 이용하여 브라켓 제거 후 접착제 잔류 양상을 관찰하였다. 그 결과, 접착레진의 온도가 상승할수록 전단결합강도의 평균 수치는 높아졌으나 통계적으로 유의할 만한 차이가 없었다(p>0.05). 접착제 잔류양상은 그룹 간 큰 차이는 없었고 대부분 브라켓 기저부와 접착레진 사이에서 파절되었으며 통계적으로 유의할 만한 차이가 없었다(p>0.05). 이상의 결과로 열 조절 장치를 사용하여 광중합 전 접착레진의 온도를 올려 브라켓을 부착하는 것은 하악 전치 금속 브라켓에서는 결합 강도에 영향을 미치지 않을 것으로 사료된다.
Fulltext
Show the fulltext
Appears in Collections:
임상치의학대학원 > 임상교정치의학전공 > Theses_Master
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

BROWSE