View : 1541 Download: 0

스테인리스스틸 크라운의 표면처리방법이 콤포짓트 레진과의 결합력에 미치는 영향

Title
스테인리스스틸 크라운의 표면처리방법이 콤포짓트 레진과의 결합력에 미치는 영향
Other Titles
Comparison of bond strength between composite resin and stainless steel crown according to surface treatments
Authors
신혜진
Issue Date
2008
Department/Major
임상치의학대학원 임상치의학과임상소아치과학전공
Publisher
이화여자대학교 임상치의학대학원
Degree
Master
Abstract
우식으로 인한 유전치의 완전 피개를 위해 사용되는 스테인리스스틸 크라운은 치아의 보호와 기능 회복에 효과적이나 심미성이 낮아 임상 응용에서 완전히 만족스럽지 못하다. Composite veneered 스테인리스스틸 크라운의 경우 우수한 심미성과 함께 기존의 스테인리스스틸 크라운의 장점을 유지할 수 있다. 그러나 레진 부착 수복물의 경우 구강 내 환경에 노출되어 교합력을 받으면 레진과 금속의 결합이 파괴되고 레진 비니어 부위에서 파절이 발생 될 수 있다 레진과 금속의 결합강도를 향상시키려는 연구들이 지속적으로 시도되고 있으며, 스테인리스스틸 크라운의 순면에 미리 레진을 비니어하여 사용할 경우나 파절된 레진을 수복하기 위해 진료실에서 편리하게 적용할 수 있는 방법으로 실리코팅 방법과 샌드블라스팅 방법이 있다. 본 연구에서는 실리코팅 방법인 Rocatec system 처리군과 전통적인 샌드블라스팅 처리군 간의 결합강도 차이를 비교해 보고자 한다. 또한 표면처리한 실험군이 열순환처리 후에도 효과를 유지할 수 있는지 알아보고자 한다. 스테인리스스틸 크라운의 표면을 Rocatec system으로 실리코팅한 후 실레인 표면처리제를 도포한 경우와 샌드블라스팅한 후 실레인 표면처리제를 도포한 경우에서 콤포짓트 레진과 스테인리스스틸 크라운 간의 전단결합강도를 측정하여 표면처리 효과를 비교하였다. 실리코팅 처리는 Rocatec system(3M ESPE)으로 하였고 실레인 처리에는 ESPE-Sil(3M ESPE) 실레인 표면처리제를 사용하였다. 표면처리한 시편에 광중합형 콤포짓트 레진(FiltekTM Z230, 3M ESPE)을 접착하고 인스트론 시험기(Instron, Model 4465)로 전단결합강도를 측정하였다. 또한 구강내 조건을 재현하기 위하여 10000회 열순환처리 (5-55oC)한 후 열순환처리에 따른 결합강도 변화를 관찰하였다.;The purpose of this study in vitro study was to determine and evaluate the shear bond strength and fracture pattern of composite resin(Filtek^(TM) Z250, 3M ESPE) to stainless steel crowns (SSCs) using different retention procedures for development and repair of a chair-side technique of producing esthetic SSCs. Sixty 3M SSCs, divided into six groups, were mounted in auto-polymerizing acrylic resin so that the resulting specimen has the crown's flat lingual surface parallel to the top surface of the acrylic resin block. Composite resin was placed in wax mold and bonded to treated SSCs (group 1, 2, 3, 4, 5, and 6). In group 1 and 4, crown surface was treated with silane. In group 2 and 5, crown surface was sandblasted with 110 ㎛ Al₂O₃. In group 3 and 6, crown surface was treated with 110 ㎛ Rocatec Plus . Group 4, 5 and 6 were thermocycled. Shear bond strength was measured using a universal testing machine with a crosshead speed of 1 mm/min until the veneer was dislodged. All data were statistically analyzed by One-way ANOVA at the significance level of 0.05. The debonded specimens were examined under a stereomicroscope (10x). The mean (SD) shear bond strengths in MPa for group 1 to 6 respectively were as follows: 1.48 ± 0.30^(a), 8.00 ± 2.27^(b), 10.71 ± 2.70^(c), 0. 21 ± 0.06^(d), 11.17 ± 1.92^(b) and 9.25 ± 1.44^(b,c) Stereoscopic examination revealed adhesive and mixed bond failures. Within the limitation of this study, sandblasting method is as effective as silicoating technique, when SSCs surface is planning to be treated with in order to enhance the bond strength.
Fulltext
Show the fulltext
Appears in Collections:
임상치의학대학원 > 임상소아치과학전공 > Theses_Master
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

BROWSE