Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 박은진 | * |
dc.date.accessioned | 2016-08-28T11:08:17Z | - |
dc.date.available | 2016-08-28T11:08:17Z | - |
dc.date.issued | 2010 | * |
dc.identifier.issn | 0022-3913 | * |
dc.identifier.other | OAK-13450 | * |
dc.identifier.uri | https://dspace.ewha.ac.kr/handle/2015.oak/229446 | - |
dc.description.abstract | Surface treatment of fiber-reinforced posts may not always increase adhesion, especially on the post/resin-based luting agent interface, which is a weaker interface than the dentin/adhesive interface. The purpose of this in vitro study was to evaluate the influence of different post surface treatments on the bond strength of a luting agent to a fiber post. Sixty-eight fiber-reinforced posts (D. T. Light-Post) were divided into 4 groups and treated with 1 of the following surface treatment procedures: no treatment (NS) (control), silanization (SA) (Monobond-S), airborne-particle abrasion (AB) (Airsonic Alu-Oxyd), or silanization subsequent to airborne-particle abrasion (AB plus SA). Specimens were bonded with dual-polymerizing resin-based luting material (Variolink II) and stored in water at 37°C for 24 hours. Shear bond strength (MPa) was measured using a universal testing machine. Data were analyzed with 1-way ANOVA and the multiple comparisons Scheffé test with Bonferroni correction (α=.05). Shear bond strength of the luting agent to the post was significantly affected by surface treatment (P<.05). Treating the surface of the post with airborne-particle abrasion resulted in a significantly higher bond strength compared with other treatments. There was no significant difference in bond strength between the silanization group and the no treatment group or the silanization plus airborne-particle abrasion group. Airborne-particle abrasion provided a significant increase in bond strength between the post and the luting agent evaluated, without additional treatments. © 2010 The Editorial Council of the Journal of Prosthetic Dentistry. | * |
dc.language | English | * |
dc.title | The effect of surface treatment of fiber-reinforced posts on adhesion of a resin-based luting agent | * |
dc.type | Article | * |
dc.relation.issue | 6 | * |
dc.relation.volume | 103 | * |
dc.relation.index | SCI | * |
dc.relation.index | SCIE | * |
dc.relation.index | SCOPUS | * |
dc.relation.startpage | 362 | * |
dc.relation.lastpage | 368 | * |
dc.relation.journaltitle | Journal of Prosthetic Dentistry | * |
dc.identifier.doi | 10.1016/S0022-3913(10)60078-9 | * |
dc.identifier.wosid | WOS:000279192700006 | * |
dc.identifier.scopusid | 2-s2.0-77955322539 | * |
dc.author.google | Choi Y. | * |
dc.author.google | Pae A. | * |
dc.author.google | Park E.-J. | * |
dc.author.google | Wright R.F. | * |
dc.contributor.scopusid | 박은진(22980964700) | * |
dc.date.modifydate | 20240802081000 | * |