Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 송보성. | - |
dc.creator | 송보성. | - |
dc.date.accessioned | 2016-08-25T06:08:36Z | - |
dc.date.available | 2016-08-25T06:08:36Z | - |
dc.date.issued | 1983 | - |
dc.identifier.other | OAK-000000034998 | - |
dc.identifier.uri | https://dspace.ewha.ac.kr/handle/2015.oak/183631 | - |
dc.identifier.uri | http://dcollection.ewha.ac.kr/jsp/common/DcLoOrgPer.jsp?sItemId=000000034998 | - |
dc.description.abstract | 본 연구는 AA5083의 규격성분이 되도록 합금하는 방법을 연구해서 제작해 보았다. AA5083을 합금하는 방법은 다음과 같다. ① Ar-Cr 모합금, Al-Mn 모합금, Al-Be 모합금을 만든다. ②Al-Cr 모합금을 Al에 용해시킨다. ③ 그 위에 Al-Be 모합금을 용해시킨 직후에 Mg을 첨가해서 Al Ingot를 만든다. ④ 이것으로 AA5083인 3.65mm인 합금판을 제조하였다. 제작된 Ingot와 합금판의 화학성분비와 인장강도를 측정해 보았다. 화학성분비는 Si Fe Cu Mn Mg Cr Zn의 순서로 각각 0.20% 0.32% 0.08% 0.8% 4.8% 0.24% 0.20%로 표준성분비와 같으며 인장강도는 3.3kg/㎟으로 한도값 31kg/㎟이상에 적합하였다. 따라서 본 논문에서 밝혀진 방법대로 합금하면 AA5083을 얻을 수 있다.;This paper describes the result of investigations as to the way how to alloy the normal composition of AA-5083. The result obtained from this investigation are as follows: (1) make Al-Cr mother-alloy, Al-Mn mother-alloy and Al-Cr mother alloy (2) dissolve Al-Cr mother-alloy in Al(3) after dissolving Al-Be mother-alloy, make Al-Ingot by adding Mg (4) With this, manufactured AA-5083 type of plate, 3.65mm thick. Measured chemical composition ratio and tensile strength of Ingot and a type of plate. As for chemical composition ratios, ie, Si, Fe, Cu, Mn, Mg, Cr, Zn, were 0.20%, 0.32% 0.08%, 0.8%, 4.8%, 0.24%, 0.20%, in order, which coincided with those of standard composition ratio and yield strength was 33kg/㎟ which satisfied the requirement over 31kg/㎟. Consequently we can obtained AA-5083 by following the method described in this paper. | - |
dc.description.tableofcontents | 논문개요 = ⅳ 표목차 = ⅴ 그림목차 = ⅵ Ⅰ. 서론 = 1 Ⅱ. 합금의 이론적 배경 = 3 A. Hume Rothery의 규칙 = 3 B. 강체적 에너지띠(rigid-band) = 4 C. Al 합금의 이론적 배경 = 6 D. AA5083에 미치는 불순물의 영향 = 8 E. AA5083의 합금 = 16 Ⅲ. 실험 = 23 A. Al-Mn 모합금 = 23 B. Al-Cr 모합금 = 23 C. Al-Be 모합금 = 24 D. AA5083 Ingot 제조 = 24 Ⅳ. 제조결과 및 분석 = 26 Ⅴ. 결론 = 29 참고문헌 = 31 ABSTRACT = 32 | - |
dc.format | application/pdf | - |
dc.format.extent | 962761 bytes | - |
dc.language | kor | - |
dc.publisher | 이화여자대학교 대학원 | - |
dc.subject | 합금제조 | - |
dc.subject | 불순물 | - |
dc.subject | Hume Rothery의 규칙 | - |
dc.title | A1-5083의 합금법 | - |
dc.type | Master's Thesis | - |
dc.title.translated | (The) Alloy method of the AA-5083 of AL | - |
dc.format.page | vi, 28, 3 p. | - |
dc.identifier.thesisdegree | Master | - |
dc.identifier.major | 대학원 물리학과 | - |
dc.date.awarded | 1983. 2 | - |